Panduit DPOE24S1X Manuale Utente Pagina 14
- Pagina / 64
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
PANDUIT® DPoE™ Power Patch Panel User’s Guide Issue 2.2
Part Number: PN378A
13
9. Lay conductors into the punchdown slots for the
specified port using the correct wiring sequence. Cable
jacket removal should be minimized to the extent
possible. Conductor untwist should be within ½” (12.7
mm) of termination.
WARNING:
NEVER TOUCH UNINSULATED COMMUNICATIONS WIRING OR
TERMINALS UNLESS THE COMMUNICATION LINE HAS BEEN
DISCONNECTED AT THE NETWORK INTERFACE.
NOTE:
Never install wiring in a slot previously used for a larger gauge wire.
10. Using the punchdown tool (PANDUIT part number PDT110), punch down the connector into the
punchdown slots on the back of the DPoE™ Power
Patch Panel.
Power Requirements
11. If the panel is being powered by a PANDUIT® DPoE™ Power Brick (See page 8, Table 1: Power
Supplies Available from PANDUIT Corp for a list of available powering options), skip to Powering
Up the DPoE™ Power Patch Panel Section below, since the brick is equipped with a matched
keyed power connector that will fit the power connector on the back of the panel.
12. If the PANDUIT® DPoE™ Power Chassis or a direct 48VDC source is powering the panel, cut
the 10-foot power harness to length then strip the ends of the leads to 5/16” (7.9 mm). Connect
the stripped ends of the power harness into the PANDUIT® DPoE™ Power Chassis. If the power
harness is not long enough or the 48VDC source requires a specific connector, strip the ends of
the wire to the same strip length, being careful not to damage the conductors.
13. Using the two butt splices provided with the panel, and paying attention to the polarity of the
supply voltage, crimp the power harness wires to the supply wires. A crimping tool, such as the
PANDUIT part number CT-100, may be used. The provided butt splices (PANDUIT part number
BSV14X) support 14-16 AWG solid or stranded wire.
- DPoE™ Power Patch Panel 1
- User’s Guide 1
- Safety Warning 2
- WARRANTY 2
- TRADEMARKS 2
- TABLE OF CONTENTS 3
- Figures 4
- List of Tables 4
- Part Number: PN378A 5
- OVERVIEW 6
- Features and Benefits 7
- Appendix 1) 9
- Panel Mounting Procedure 11
- Power Requirements 14
- Basic Troubleshooting 16
- OPERATION 18
- ELEMENT MANAGER SOFTWARE 20
- Element Manager Operation 23
- Subnetwork Search 28
- IP Range Search 29
- Figure 4: View Panel Screen 34
- Edit Panel Information 34
- − SNMP Settings 36
- − Trap Settings 36
- Export Log 41
- View Entire Log 42
- − Filter Log Messages 43
- − Export Log 43
- − Clear Log 44
- Table 12: EM Log Messages 48
- INSTALLATION 54
- AN-TY’S 55
- AN-TY’S are used to secure 55
- AN-TY's 61
- TECHNICAL SPECIFICATIONS 63
- GLOSSARY 64
Prodotti e manuali riguardandi Hardware Panduit DPOE24S1X
Hardware Panduit PVMAPU246GK Manuale Utente
(2 pagine)
(2 pagine)
Hardware Panduit PN366E Manuale Utente
(2 pagine)
(2 pagine)
Hardware Panduit PN79G Manuale Utente
(2 pagine)
(2 pagine)
Hardware Panduit PN433 Manuale Utente
(0 pagine)
(0 pagine)
Hardware Panduit FBB2 Manuale Utente
(1 pagine)
(1 pagine)
Hardware Panduit PN260 Manuale Utente
(1 pagine)
(1 pagine)
Parrot PF300003AA manuales
Manuales del propietario y guías del usuario para Kits de coche Parrot PF300003AA.
Ofrecemos 1 manuales en pdf Parrot PF300003AA para descargar gratis por tipos de documentos: Ficha de datos
Commenti su questo manuale